BOTTLE CAP FIDGET SPINNERS

At home I always have nothing to do and if you're the same as me well. Here’s a simple and easy way to make a bottle cap  fidget spinner.

Needs:

1 Sesers

2 Wooden sticks.

3 5 bottle caps

4 Hot glue gun

5 Maker

6 Something pointy

7 canters

Steps:

1 Get two bottle caps and get some thing pointy to poke a hole in the two caps.You have to poke a hole in the middle of the two caps. And you can't use milk caps because want fit in your hands. Also get an adult or senior to poke a hole.

2 Then get a hot glue gun and glue on one side bottle cap but glue on the flat side. Glue around the hole you made.Also you need to get an adult or a senior to glue it.

3 Then get three other bottle caps and put them where you want them by the other two bottle caps.

4 Then get a maker and mark were the fidget caps are going.5 Then grab the glue gun and glue the caps were the mark is.6 Then grab a thick wooden stick and poke it through the hole you made. Ten cut both sides but they have to be poking out a little.7 Ten grab two counters and get the hot glue gun and  an adult and glue the counters on each side of the stick.8 Then just what for it to dry. If you follow these steps you will. Have an bottle cap fidget spinner that spins for 10 seconds!!!